This swing frame assembly has been adapted from the Wall Mounting Cabinet to allow it to be used in Type ‘A’, S2005, S280 Industrial and RFI 19″ cabinets.

The design of the swing frame requires the useable rack area to be reduced by 3‑rack units.

The 4 and 10 RU frames can be used on their own or, if space permits, they can be used in conjunction with other height frames to allow for independant access.

When using 18RU, 27RU, 39RU or 45RU cabinets, the maximum height swing frame assembly for the cabinet is 15RU, 24RU, 36RU and 42RU respectively.

When mounting the swing frame into a Type ‘A’ or S2005 cabinet from the top down or the base up 2 horizontal stiffeners to suit the cabinet depth will be required.

For mid-mount 4 horizontal stiffeners to suit the cabinet depth will be required.

The swing frame assembly is most useful for rear mounting patch panels behind front mounted equipment whilst still allowing access to the equipment rear.

The angle brackets pictured are used when the swing frame assembly is to be mounted into an S280 Industrial or RFI  cabinet. They can also be mounted directly on to a wall typically in a riser cupboard. Areas of confined space that require rear access is another popular application.